When we got our ender 3 my son was 11. We assembled the day it came in and started the test print that came on the card. We watched as it painstakingly took hours to print the small sample. Already past his bed time, he was there to pull it off the bed immediately. He woke me up at 5 am to tell me he found an stl online, installed the slicer software, set it up for our printer, sliced his model, got the gcode on the sd card, to the printer and had it running already while I was sleeping. We had never once talked about 3d printing to this level, this was all him doing the research on his own. Having that interest that turns into an itch that you can’t shake, you must read, learn, and try until you figure it out.
Brainstorming Setting fire planet mining colony An abandoned drilling station Conflict An old drilling station has been taken over by pirates The old station was abandoned because it was too close to a pocket of explosive gas If they are able to start up the station they will be able to make unimaginable profits Doing so will cause an explosion that will take down nearby towns. Characters A young boy has discovered the old station has been taken over by pirates A Pirate Captain willing to risk it all for the profits
This test print features a custom keycap designed with a Kubernetes logo.
Yes Ok we should probably dive deeper into this, but good chance if you are here and have made it this far you it would probably be a fine choice. The choice is quite time and skill dependant. Time First thing up, if you like copy pasting thing into your homelab, changing a few config options, but mostly running it as the docs instructed, kubernetes is not for you. The homelab/self hosting space is heavily reliant on docker compose, 90% of the things you want to run will likely have a docker command, and likely a docker compose example that you can copy paste and get running right away. Maybe 5% of projects have something for kubernetes, you Will have to do it yourself. Kubernetes is very DIY in the self hosting space, and not very plug and play. Skill
I’m trying to setup gpg for kdewallet on archlinux with hyprland so that brave shuts up. I’ve tried this, but brave still complains about the wallet setup, so this post is to be continued.