Cracked Caps I learned that my caps were set to interface fit and most crack on install. Making the + pattern bigger makes them easier to get on and actually hold tighter. Aug 18, 2026
Share To Plaindown New workflow unlocked, sharing images and links straight to plaindown on my phone. Aug 12, 2026
Caps Themes Here's a recording running through caps themes and filiment colors, caps is a cap creation site I'm working on. Aug 11, 2026
Comparing Depth Of Color In Esc Keys Running some test prints on keycaps using some different fonts, the group on the left(top) was done first with .4mm depth and the right(bottom) was done with a 2mm depth, the colors came out much more vibrant without the black blending in. Aug 9, 2026
Mid Print On A New Set Of Caps The ledends were cut quite a bit deeper in this set I think the color is going to come out much more vibrant Aug 9, 2026
First Set Of Caps Printed From Caps.waylonwalker.com This first set of caps printed for real off my new https://caps.waylonwalker.com app came out really well, I can tell the legend cut is not deep enough and the two colors are mixing too much. I'm actually surprised at how much I like the thinner sets better than the thicker sets, I thought thicker would have done better prints. Aug 9, 2026
Caps Got Good Adhesion No raft straight on the bed with a .4mm sink into the plate stuck really well, none fell off mid print. I've strugged to get grids of caps to print well in the past. Aug 9, 2026
It Kept Printing Sideways After a particularly tall print vibrations had moved my ams under the gantry of my bambu a1 so when it started its next print, it lifted it up, its safe, no printer was harmed, but this was a close call. Aug 8, 2026
Dusty Routing This was the biggest routing job I've done yet on the bosch colt, it really worked the motor. I ended up feeling like high speed was controlling its speed better and keeping it cooler, contrary to what I would think was right. Aug 8, 2026
I Feel Called Out For Burning Things In The Oven I Feel Called Out For Burning Things In The Oven Jul 30, 2026
Fresh Marin Marin refresh 2026 wen't so good, the bike now shifts through all of the gears super smooth and is an absolute joy to ride. Jun 27, 2026
Into The Tunnel Super cool tunnel on our bike ride feels like air conditioning even on the hottest days. Jun 27, 2026
Entering The Tunnel Some rich greenery surrounding a beautiful creek entering a long tunnel. Jun 27, 2026
I Did One More Prompt To A Long Running Session A Day Later I did one more prompt to a long running performance tuning session, that included many runs-reruns, and it took a chunk out of my 5 hour limit. Jun 24, 2026
T Handle Wire Puller In Action T Handle Wire Puller in Action, sliding in to grab some fresh copper. Jun 21, 2026
T Handle Wire Puller T Handle Wire Puller, with just the right hook on the end, and filed down just thin enough to slip in and grab wire. Jun 21, 2026
Almost Broken Drivetrain Chain between the gears, its almost more frustrating that it still works most of the time and teases me that if I just knew what I was doing I could fix it properly. May 25, 2026
Power Washing The Sidewalk 2026 It's been a couple of years since I've fully done our sidewalk, it was time before it got slimy again. May 23, 2026
