Posts tagged: tmk

Today I dropped some new caps in the porta-john. I need to do a bunch of posts on zmk and my journey building the porta-john, I’ve been rocking it for at least two weeks now pretty solid and I am absolutely loving it. More on that later. KLP-Lame-Keycaps # [1] The model of the caps are KLP-Lame [2] by braindefender [3] , they are super rounded and smooth. They look really good on camera and feel good to the finders. [4] I printed these at home on my ender3 s1 pro with a black and purple silk filliment. I printed all 42 at once using a Printing 42 keys at once [5] technique. They do have just a bit of a rough texture that you can feel on your figertips. I printed these on super quality .12mm layer height, while my last set was printed on draft quality .32mm layer height. They look crazy different in print quality with the lines of the new caps barely showing, the feel isn’t nearly as drastic. The Result # [6] Check out the final shots as I set up the porta-john with these swee...

I’m working on creating some gcode to create a whole set of key caps in one print, it is getting tedious to print them one at a time, and my past experience with my printer proves that printing a bunch of separate pieces increases the chances of failure. I don’t want to end up with 42 keys that are half done and a ball of filament. figuring out the coordinates # [1] To figure out the coordinates I printed one key cap, and manually jogged the printer in position to knock off the cap, then sweep it out of the way. [2] print head in position to knock [3] Position before the knock [4] Position after the sweep gcode # [5] I opened the gcode split it into start.gcode, end.gcode, and part.gcode. start.gcode # [6] ;FLAVOR:Marlin ;TIME:1488 ;Filament used: 0.265511m ;Layer height: 0.12 ;MINX:105.708 ;MINY:101.231 ;MINZ:0.12 ;MAXX:113.512 ;MAXY:118.776 ;MAXZ:17.04 ;TARGET_MACHINE.NAME:Creality Ender-3 S1 Pro ;Generated with Cura_SteamEngine 5.8.0 M82 ;absolute extrusion mode ; End...