Drafts

Draft and unpublished posts

0 posts

Raft

Steam achievements and progress for Raft - 19.23% complete with 20/104 achievements unlocked.

7 min

Wizard with a Gun

Steam achievements and progress for Wizard with a Gun - 60.87% complete with 28/46 achievements unlocked.

6 min

HOT WHEELS UNLEASHED™

Steam achievements and progress for HOT WHEELS UNLEASHED™ - 32.08% complete with 17/53 achievements unlocked.

7 min
My Firs Keycaps with Symbols
Finally got my first set of keycaps with letters! These low-profile keys look perfect for customizing my keyboard setup.
First Self-Designed Keycaps and Symbols
These are more keycaps from my very first set that I designed and printed myself. Some of the symbols are a little wonky, and a few were too thin to print cleanly.
My First Printed Keycaps Are Here
Completing my first batch of keycaps designed and printed entirely by myself on the Bambu Lab A1.

PHX

Steam achievements and progress for PHX - 68.89% complete with 31/45 achievements unlocked.

5 min

STAR WARS Jedi: Fallen Order™

Steam achievements and progress for STAR WARS Jedi: Fallen Order™ - 5.13% complete with 2/39 achievements unlocked.

5 min

Harry Potter: Quidditch Champions

Steam achievements and progress for Harry Potter: Quidditch Champions - 74.19% complete with 23/31 achievements unlocked.

5 min

Human: Fall Flat

Steam achievements and progress for Human: Fall Flat - 48.98% complete with 72/147 achievements unlocked.

11 min

Weeknote 0

Inspired by Simon Willison I'm starting a weeknotes retrospective post to recap the week. The theme this week has been learning and setting up obsidian to...

1 min

SteamWorld NewGame2017

Steam achievements and progress for SteamWorld NewGame2017 - 2.94% complete with 1/34 achievements unlocked.

5 min

Printing 42 keys at once

I’m working on creating some gcode to create a whole set of key caps in one print, it is getting tedious to print them one at a time, and my past experience with my printer proves that printing a bunch of separate pieces increases the chances of failure. I don’t want to end up with 42 keys that are half done and a ball of filament. figuring out the coordinates # [1] To figure out the coordinates I printed one key cap, and manually jogged the printer in position to knock off the cap, then sweep it out of the way. [2] print head in position to knock [3] Position before the knock [4] Position after the sweep gcode # [5] I opened the gcode split it into start.gcode, end.gcode, and part.gcode. start.gcode # [6] ;FLAVOR:Marlin ;TIME:1488 ;Filament used: 0.265511m ;Layer height: 0.12 ;MINX:105.708 ;MINY:101.231 ;MINZ:0.12 ;MAXX:113.512 ;MAXY:118.776 ;MAXZ:17.04 ;TARGET_MACHINE.NAME:Creality Ender-3 S1 Pro ;Generated with Cura_SteamEngine 5.8.0 M82 ;absolute extrusion mode ; End...

The Farmer Was Replaced

Steam achievements and progress for The Farmer Was Replaced - 0.0% complete with 0/59 achievements unlocked.

5 min
The Portajohn Monoblock Keyboard Design
Check out the Portajohn! This custom 42-key monoblock was my first full keyboard build, designed to plop on a laptop, while still exposing the trackpad and able to flip over and toss in a backpack.

Slime Rancher

Steam achievements and progress for Slime Rancher - 57.89% complete with 33/57 achievements unlocked.

7 min

My Reader Project

In 2024 I built my own reader after years of being bitter about google killing reader more than a decade prior. Seealso All the way back in 2020 I made a post on what I wanted to build into my own reader. It went long forgotten until I tried to make this post and slugs clashed. Reader-2020 [1] Built on markata # [2] I built it on top of my own static site generator markata [3], feedparser (🐍 Parsing RSS feeds with Python [4]), some jinja templating, and tailwind. After putting all the work I have into markata, it makes projects like this fairly easy to build out with just a custom loader to load new posts in. References: [1]: /reader-2020/ [2]: #built-on-markata [3]: /markata/ [4]: /parsing-rss-python/

Witch Hunt

Steam achievements and progress for Witch Hunt - 7.32% complete with 3/41 achievements unlocked.

6 min

I've added htmx to my blog

I’ve added htmx [1] to my blog. It’s extra bloatware that I long avoided, but it’s so damn convenient. Ok so it’s not bloatware, but it’s not the theme I was going for. I wanted my site to be as lightweight as possible. I had at one point gone too far and had Mb’s of react that did not provide any value for the end user. can it be done with jinja # [2] {% with feed = markata.feeds.recent_thoughts %} {% include 'feed_sm_partial.html [3]' %} {% endwith %} Feed Partials # [4] markata [5] pre-release 0.8.1.dev10 has been released with support for feed partials on pypi [6]. It’s now part of my blog # [7] Commit aa233 [8] added support for recent posts on each page to be loaded off of this partial. References: [1]: /htmx/ [2]: #can-it-be-done-with-jinja [3]: /html/ [4]: #feed-partials [5]: /markata/ [6]: https://pypi.org/project/markata/0.8.1.dev10/ [7]: #its-now-part-of-my-blog [8]: https://github.com/WaylonWalker/waylonwalker.com/commit/aa23361e8606b62f7e4ca1a9305e6975fcdbc088

latest

My latest blog post is [[ {{ markata.feeds.blogfeed.posts[0].slug }} ]]. Click the link if you are not automatically redirected.
1 min read
meta